With the FLIR thermal camera sensor and the 4K camera, this is the best combination for drones at the moment. By simply and quickly switching between normal image and thermal image, you have a super fast view of what’s going on in your project.
Robust dual-thermal sensor solution
The IP44 water protective housing contains a 4K visual camera and a thermal camera which is available with different options and resolutions.
The XT2 allows you to identify important objects on site, rather than a long post-processing.
In addition, you can select a specific point and measure the temperature there.
The software allows you to select a certain point to be tracked by the XT2. It is also possible to switch between thermal images and normal images to determine the location properly.
By setting a temperature alarm, you never miss a hot spot during your inspection.
The XT2 can be used for different thermal image inspections including off-shore, roof inspections, solar panel inspections, energy networks, agriculture and much more. You need a different type of thermal imaging camera for each application.
Customdrone has specialized in this and knows how to choose the right camera for every inspection.
Would you like more information about which thermal imaging camera and drone is suitable for your company? Then get in touch. We are happy to help.
Thermal (thermal imaging) camera
Thermal (thermal imaging) sensor: Uncooled VOx Microbolometer
Resolution: 640 × 512
Pixel Pitch: 17 μm
Spectral Band: 7.5-13.5 μm
Full Frame Rates: 30 Hz
Exportable Frame Rates:
Scene Range (High Gain): 640×512: -25° to 135℃, 336×256: -25° to 100℃
Scene Range (Low Gain): -40 ° to 550 ℃
File Storage: MicroSD card
Picture Format: JPEG, TIFF, R-JPEG
Video Format: 8 bit: MOV, MP4
14 bit: TIFF Sequence, SEQ
Visual camera sensor: 1 / 1.7 ″ CMOS
4K Ultra HD: 3840×2160 29.97p
FHD: 1920×1080 29.97p
Still Photography Modes:
Burst Shooting(3/5 frames)
Interval (2/3/5/7/10/15/20/30 sec